Product Center

Adhering to Baolute's environmentally friendly concept, we continuously innovate and provide customized, professional products to meet diverse needs.

New product

Superhydrophilic fiber

Superhydrophilic fibers are produced by adding a composite finishing agent during the fiber production process. They are hydrophilic and lipophilic in air, hydrophobic underwater, and hydrophilic under oil. They can achieve effects such as oil-water separation and easy decontamination.

Glue-activated Polyester Fiber

During the fiber production process, adding a finishing agent that promotes the polymerization of α-cyanoacrylate can achieve the effect of rapid curing of 502 or 401 glue within 1 minute.

ELA-AN® ELASTIC FIBER B SERIES

ELA-AN® Elastic fiber B series products are hollow type side by side bi-component fiber that utilize the different shrinkage properties of PBT and PET polymers to achieve fiber elasticity and stretch characterization.

ELA-AN® ELASTIC FIBER T SERIES

ELA-AN® Elastic fiber T-series products are eccentric or hollow side-by-side composite products. Utilizing the different physical properties of the two materials, the low-melting-point elastomer component melts and bonds when heated, enabling non-woven fabrics to exhibit excellent compression resilience.

ELA-AN® ELASTIC FIBER F SERIES

ELA-AN® Elastic fiber F series products are solid type side by side bi-component fiber that utilize the different shrinkage properties of PTT and PET polymers to achieve fiber elasticity and stretch characterization.

C6 Hot Water Repellent Polyester Staple Fiber

In the fiber production process, adding a C6 water-repellent finishing agent forms a water-repellent film with a relatively high melting point on the fiber surface, thereby endowing the fiber with hot water repellency.

Fluorine-Free Water-Repellent Fiber

Fluorine-free water-repellent finishing agent is used to add oil to the fibers after drafting and spinning to give the fibers water-repellent properties.

Essence ES Fiber

In the fiber production process, adding a C6 water-repellent finishing agent forms a water-repellent film with a relatively high melting point on the fiber surface, thereby endowing the fiber with hot water repellency.

< 1 > proceed page